M2003FC1AE

The NuMicro® M2003FC1AE 32-bit microcontroller is based on Arm® Cortex®-M23 core with 32-bit hardware multiplier/divider. It runs up to 24 MHz and features 32 Kbytes Flash, 4 Kbytes SRAM, 2.4V to 5.5V operating voltage, and -40°C to 105°C operating temperature.

Enhanced IP compared to NuMicro 1T 8051 series

The M2003FC1AE provides plenty of peripherals including 4 sets of 32-bit Timers, Watchdog Timers, 3-channel enhanced input capture, up to 2 sets of UART, 1 set of I2C and 1 set of Universal Serial Control Interface (USCI) that can be set as UART/SPI/I2C flexibly. Furthermore, all these communication interfaces have the individual FIFO to ensure the integrity of high-speed communication data. The M2003FC1AE also provides rich analog peripherals including 8 single-end analog input channels of 500 ksps 12-bit ADC and 6 channels of 16-bit PWM. The peripherals integrated into the M2003FC1AE offer enhanced functionality compared to the NuMicro 1T 8051 series products.

Pin Compatible with NuMicro 1T 8051 series

The M2003FC1AE with multiple function pins is fully compatible and seamlessly aligned with the Nuvoton N76E003AT20, N76S003AT20, MS51FB9AE, MG51FB9AE, and MG51FC9AE. (see the tables below)

Table 1 - Package vs. Product Series

Table 2 - Code-to-Code vs. Package Table

Key Features:

•Operating Characteristics
 
-Voltage range: 2.4V to 5.5V
 
-Temperature range: -40°C to +105°C
 
-EFT 4.4 kV
 
-ESD HBM 7 kV
 
 
 
•Core
 
-Arm Cortex-M23 core running up to 24 MHz
 
-Single-cycle hardware multiplier and 32-bit 17-cycle hardware divider
 
 
•Memory
 
-32 KB Flash
 
-4 KB SRAM
 
-4 KB Flash for user program loader (LDROM)
 
-1 KB security protection ROM (SPROM)
 
-ISP/ ICP/ IAP programming
 
 
•Clocks
 
-Internal 24 MHz HIRC oscillator ±4% within all temperature range, ±2% at 0°C ~ 85°C, ±1% at 25°C)
 
-Internal 10 kHz LIRC oscillator with variation ±50% within all temperature range
 
 
 
•Power management
 
-Supports Cap-less LDO
 
-Supports NPD Mode
 
-Supports BOD (4.4/ 3.7/ 2.7/ 2.2V falling edge)
 
-Normal run: 130 µA/MHz
 
-Idle: <40 µA/MHz
 
 
 
•Timers
 
-Four 32-bit timers
 
-One 24-bit count-down SysTick timer
 
-One Independent watchdog
 
-One window watchdog
 
-One 3-channel Enhanced input capture (ECAP)
 
 
•PWM
 
-6 channels of PWM with one 16-bit timer
 
 
•Analog
 
-8 channels of 12-bit 500 ksps SAR ADC
 
 
 
•Communication interfaces
 
-2 sets of UART interfaces with UART, RS-485 and IrDA mode
 
-1 set of I²C interface
 
-1 set of USCI interface supporting UART, SPI and I²C mode
 
 
•Up to 18 I/O 
 
•96-bit Unique ID (UID) 
 
•128-bit Unique Customer ID (UCID)
 
 
•Package
 
-TSSOP20
 
 
•Evaluation Board
 
-NuMaker-M2003FC